Home›Parts, accessories & upgrades›Power-Pole
Power-Pole installation in Florida
Stop.
Stay. Fish.
Power-Pole shallow-water anchors hold your boat in place at the push of a button, silently. Our techs mount, wire and set them up on bay boats, skiffs and center consoles.
1 button
Deploys and holds without an anchor line
Silent
No noise to spook fish on the flats
1 or 2
Single or dual anchors on the transom
Any boat
Bay boats, skiffs, center consoles
What is a Power-Pole shallow water anchor?: An anchor without the anchor.
A Power-Pole is a hydraulic or electric spike mounted on the transom. Press a button and it drives into the bottom to hold the boat in place. Press again and it retracts.
It’s faster and quieter than a traditional anchor, and you never have to go forward to set or pull a line. In shallow water it’s the most popular upgrade on a bay boat.
| Power-Pole | Traditional anchor | |
|---|---|---|
| Setting it | One button, from the helm or remote | Go forward, drop, set, tie off |
| Noise | Quiet, won’t spook fish | Chain and rode noise |
| Re-positioning | Seconds | Pull up, move, reset |
| Best depth | Shallow water | Any depth |
Power-Pole options we install: Choose your setup.
Pole length, single or dual, and how you want to control it.
Most installed
Power-Pole
Blade
The sleek, quick-deploying anchor most bay boat owners choose.
Best for
Bay boats and center consoles
Mount
Transom, single or dual
Power-Pole
Pro Series
Heavy-duty anchoring for bigger boats and rougher bottoms.
Best for
Larger bay boats
Mount
Transom, single or dual
Power-Pole
CHARGE
Battery management that keeps your anchors and trolling motor topped up.
Best for
Boats with multiple banks
Pairs with
Power-Pole, trolling motors
Every install is quoted before we start.
Power-Pole installation: How we fit it.
1
Check the transom
We confirm mounting room, engine clearance and jack-plate setup.
2
Mount
Brackets fitted and sealed, single or dual.
3
Wire
Powered, fused and paired to remotes and your display.
4
Water test
Deployed and held on the water before handover.
Before we quote
Send us these and we’ll price it right:
Boat year, make and model
Transom photos with the engine trimmed down
Jack plate or not
Single or dual anchors
Where you fish most
Adding a trolling motor too? Power-Pole and Minn Kota network together.
Power-Pole install process: Quote to water.
1
Quote
Model, length and mount matched to your boat.
2
Install
Mounted and wired at the store or your dock.
3
Setup
Remotes and display paired.
4
Walkthrough
We show you deploy modes and care.
Shallow water fishing setup: Build the whole rig.
Power-Pole, a GPS trolling motor and a lithium bank make a bay boat that holds anywhere, all day.
Get a Power-Pole quote: Ready to stay put?
Tell us about your boat and we’ll recommend the right Power-Pole setup and quote the install.
(407) 289-1220
Orlando service desk
Power-Pole quote
We reply with a quote, usually within one business day.
Power-Pole questions: Pole answers.
Something else? Ask the team or start a quote above.
How deep does a Power-Pole work?
It’s built for shallow water, the flats, sandbars and grass edges. We match pole length to where you fish.
Single or dual?
A single holds most boats well. Dual stops the stern swinging in wind and current.
Will it fit with my jack plate?
Usually, yes. Send transom photos and we’ll confirm.
Do I need to have bought my boat from you?
No. We install Power-Pole on any boat that fits.